www.microcontrolador.net

CNC control and connectivity

 

ABServoSim Gate/Door- Application


General Description

The ABServo SIM Gate/Door let you control your urbanization gate for thousands different number using your smartphone from any part of your country. With sending a simple message, for example, *1 you will open the master gate. Also, you can control either doors or device or any that you need turn on. This systems works with sms and ring command. ABServo Sim also can response from any input event on its in ports. The goals is activated/deactiva for mass telephone numbers, for all kind of phone.


.

What do you need for this project?


1) ABServo Sim GSM/SMS with ccesories






2) Super motor gate/door





3) Laptop/Personal computer with serial/rs232/usb




4) Serial hyperterminal software: RealTerm

Download from this link









Where to install to control Gate/Door?
Example System Map





How wire yours ABServo-Sim system open gate/door?








 

 

 

ABServoSim - SMS/Ring Basic Command


Command

Format

Example

Add a new phone number.

Description: This command add a cellular or phone number in the memory to be accepted by the system. Return the number added.

Scope: From any phone number previously saved and accepted.




 Command SMS
 Addnumber#password#phonenumber

 Where:
     Password: 4 digit number.
     Phone number: your smartphone number, only digit.

 Return sms

 Added number: Phone number.

 
 Command SMS
 Addnumber#1234#04146481243

 Where:
     Password: 1234
     Number to Add: 04166481243

 Return sms

 Added number: 04166481243.


Block a written phone number

Description: This command block a cellular or phone number in the memory. This number is rejected by the system. Return the number rejected.

Scope: From any phone number previously saved and accepted.



  
 
Command SMS
 Blocknumber#password#phonenumber


 Where:
     Password: 4 digit number.
     Phone number: blocked smartphone number, only digit.

 Return sms

 Blocked number: Phone number.

  
 Command SMS
 Blocknumber#1234#04146481243


 Where:
     Password: 1234
     Number to Block: 04166481243

 Return sms

 Blocked number: 04166481243.


Unblock a written phone number

Description: This command unblock a cellular or phone number in the memory previously blocked in the system.

Scope: From any phone number previously saved and accepted.



 Command SMS
 Unblocknumber#password#phonenumber

 Where:
     Password: 4 digit number.
     Phone number: unblocked phone number, only digit.

 Return sms

 Unblocked number: Phone number.


 
 
Command SMS   Unblocknumber#1234#04146481243

 Where:
     Password: 1234
     Number to Unblock: 04166481243

 Return sms

 Unblocked number: 04166481243.



Halt system

Description: This command stop all the system. Afterward you need push reset button or turn on/off the system.

Scope: From  authorized phone number previously saved and accepted.



 
 Command SMS
 Haltsystem#password#

 Where:
     Password: 4 digit number.

 Return sms

 Halt command.

    
 
 Command SMS
 Haltsystem#1234#

 Where:
     Password: 1234

 Return sms

 Halt command.

    

Show data used on memory

Description: This command show the use and remain of data in the memory of the system.

1) Permanet mass numbers at least 4000 diferent telephone. Show used memory and remain memory.

2) Temporal numbers up to 150 numbers, used and remain data.
 
 3) Blocked numbers up to 40, used data and remain.

Scope: From  authorized phone number previously saved and accepted.


  Command SMS
  Showmemory#password#

  Where:
     Password: 4 digit number.

  Return sms
  info:www.microcontrolador.net
  EEPROM->MaxNum:Total Memory;
  Num: Space used;
  Remain: Space free;
  Added->MaxNum:Total Memory;
  Num: Space used;
  Remain: Space free;
  Blocked->MaxNum: Total Memory;
  Num: Space used;
  Remain:Space free.
 
  Command SMS
  Showmemory#1234#

  Where:
     Password: 1234
  
  Return sms
   info:www.microcontrolador.net
  EEPROM->MaxNum: 4928;
  Num: 525;
  Remain: 4403;
  Added->MaxNum:152;
  Num: 1;
  Remain: 151;
  Blocked->MaxNum: 40;
  Num: 0;
  Remain:40.

Show inside parameters

Description: This command show the internal parameters of data in the system memory. Some of parameters are access password, pin for access to enter in gsm net, IMEI, administrator phone to notify, delay of each relays 1, 2, 3 and 4, toggle state, log story for each relay and more parameters.

Scope: From  authorized phone number previously saved and accepted.



 
 
Command SMS
 Showparameters#password#

 Where:
     Password: 4 digit number.

Return sms
  info:www.microcontrolador.net
  RootPass:4 digit pass;
  Pin: Phone PIN;
  IMEI: IMEI factory number;
  PhoNotify: Phone to notify;
  R1(ms): Time for relay 1 in millisecond;
  R2(ms): Time for relay 2 in millisecond;
  R3(ms): Time for relay 3 in millisecond;
  R4(ms): Time for relay 4 in millisecond;
  Log 0:Off 1:On;
  LogSMS-R1: On/Off;
  LogSMS-R2: On/Off;
  LogSMS-R3: On/Off;
  LogSMS-R4: On/Off;


 
 
Command SMS
 Showparameters#1234#


 Where:
     Password: 1234

Return sms
  info:www.microcontrolador.net
  RootPass: 0000;
  Pin: 1234;
  IMEI: 86X63XX0577276245;
  PhoNotify: 04125026923;
  R1(ms): 1000;
  R2(ms): 1000;
  R3(ms): 0;
  R4(ms): 1000;
  Log 0:Off 1:On;
  LogSMS-R1:0;
  LogSMS-R2:0;
  LogSMS-R3:0;
  LogSMS-R4:0;


Show movil Operator

Description: This command show the name/net of your movil.  It is equivalent to AT+COPS=?

Scope: From  authorized phone number previously saved and accepted.



 
  Command SMS
 
  Showoperator#password#


 Where:
     Password: 4 digit number


  Return sms
 +CPOS:(...gsm info...),(),()...



  
  Command SMS
 

  Showparameters#1234#


 Where:
     Password: 1234

  Return sms
   +CPOS:(2,"DIGITELTIM","DIGITEL"),(),()...



Show movil Signal

Description: This command show the signal quality  for the net.  It is equivalent to AT+CSQ

Scope: From  authorized phone number previously saved and accepted.



    Command SMS 
   Showsignal#password#

  Where:
     Password: 4 digit number

  Return sms
  +CSQ: rssi dBm, ber
    Command SMS 
  Showsignal#1234#


  Where:
     Password: 1234

  Return sms
  +CSQ: 20,0

Show sim serial and firmware 

Description: This command show IMEI number and the firmware version of the ABServoSim Module.

Scope: From  authorized phone number previously saved and accepted.



  Command SMS
  Showsimserial#password#

 
 Where:
     Password: 4 digit number

  Return sms
  IMEI:
8626XX103XX7727624
FIRMWARE: Current version
 
 

  Command SMS
  Showsimserial#1234#
 
 Where:
     Password: 1234

  Return sms
  IMEI:
8626XX103XX7727624
FIRMWARE:ABSIM800C-2685-2018...

 
 Execute an AT command 

Description: This command execute an AT command and show the result on sms. This let the ABServosim execute almost all AT command on the systems and GSM Net 

Scope: From  authorized phone number previously saved and accepted.




  Command SMS
  AT#0000#at_command

 Where:
     Password: 4 digit number
     at_command: Any AT Command protocolo.

  Return sms
  Response of the AT command.




 Command SMS
  AT#0000#AT+CSQ

 Where:
     Password:0000
     AT command: AT+CSQ.

  Return sms
      +CSQ: 12,0




 

 


Donate and contribution is so important to keep our development and research turn on.
We appreciate very much your contribution to our team. We are leaving our Bitcoin Wallet address.

With willing heart, Thanks you.
 

Blockchain BITCOIN wallet

 

14Q4qoHvQAHLNCZcTob3ghZQyPyYL43FYJ


www.microcontrolador.net

Address: 1ra Etapa Calle El cuji Casa 544. Guacara, Stated Carabobo. CP 2016 Venezuela